2007 Hummer H3, Viper 4706V, Idatalink

Home / the12volt's Install Bay / Car Security and Convenience / 2007 Hummer H3, Viper 4706V, Idatalink

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

discodoodie

Member - Posts: 8

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 18, 2014

Location: Newfoundland, Canada

Posted: April 18, 2019 at 3:32 AM / IP Logged

Hello, I have a Viper 4706v and ADS-ALCA FW DBI AL(DL) GM4. on a 2007 H3 Hummer. I used the D2D connection between the Viper and ADS. I've been using this for a few years but the lock/unlock feature was always unreliable often having to press lock or unlock three times to get the doors to react. As such the alarm was going off (horn beeping three times with remote start). I finally got around to connecting the bypass module W2W to see if it would improve the reliability of the lock/unlock and properly diasrm the OEM alarm (unlock the doors) prior to remote start. With W2W the doors always lock and unlock with a single remote key press, so that's an improvement. Unfortunately, the door never unlock prior to remote start. Am I missing something? Is this a programming issue?

Thanks

Back to Top

kreg357

Platinum - Posts: 7,783

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: April 18, 2019 at 4:37 AM / IP Logged

Not sure which firmware version of GM4 you are using but there should be a programming option in the GM4 Advanced area for "Unlock before and Lock after remote start". You will need the ADS USB cable and iDatalink WEB access to make this change.

Soldering is fun!

Back to Top

silvercivicsir

Copper - Posts: 402

Joined: November 21, 2003

Posted: May 30, 2019 at 3:06 PM / IP Logged

try turning on safe start on the viper.

Back to Top

Search for other posts by silvercivicsir

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.