3X Lock Remote Start, 2017 Ford Fusion

Home / the12volt's Install Bay / Car Security and Convenience / 3X Lock Remote Start, 2017 Ford Fusion

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ricardoboston

Copper - Posts: 268

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: November 25, 2019 at 5:08 PM / IP Logged

Hi everyone. I have done a remote starter using a dball3 bypass as 3x lock on a 2017 Ford Fusion, a push to start button. The installation was very simple ,straight to OBD and everything was fine, at first. The car starts up normally by pressing the lock button 3 times (OEM remote) with no problem, but on the second attempt, it will not start the car, but instead it will sound the horn 2 times within a minute or less it beeps two more times and stops. I am not sure what it can be. I re-checked the wires and I couldn't find anything wrong. I need some help with this issue. It is very much appreciated!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.