Does The 12V Wire Need To Be Constant?

Home / the12volt's Install Bay / Car Security and Convenience / Does The 12V Wire Need To Be Constant?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

josephc04

Member - Posts: 1

Joined: June 10, 2020

Posted: June 15, 2020 at 7:41 PM / IP Logged

Currently looking to install a Viper 4105 in my 2009 Ford Escape. There are two wires on the remote start harness that show they should be connected to a "(+) (30A) HIGH CURRENT 12V INPUT". Should that wire be a 12V constant, or should it only supply 12V when the ignition is in the run or on position?

Thanks in advance.

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: June 15, 2020 at 7:56 PM / IP Logged

Must be constant. This constant power allows the system to be ON awaiting commands from the Viper 4105 remotes.

Soldering is fun!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.