the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2015 Toyota Tundra Crewmax Limited, Windows and Sunroof


Post ReplyPost New Topic
< Prev Topic Next Topic >
brianh 
Silver - Posts: 516
Silver spacespace
Joined: August 25, 2002
Location: United States
Posted: January 31, 2021 at 10:44 AM / IP Logged Link to Post Post Reply Quote brianh
Has anyone used a timer and a relay to close/ open the front windows and sunroof by tapping the wires at the driver door? If so what was your set up for closing and also for rolling down.   Thanks in adavance. Brian
brianh 
Silver - Posts: 516
Silver spacespace
Joined: August 25, 2002
Location: United States
Posted: January 31, 2021 at 2:36 PM / IP Logged Link to Post Post Reply Quote brianh
Anyone?
brianh 
Silver - Posts: 516
Silver spacespace
Joined: August 25, 2002
Location: United States
Posted: February 21, 2021 at 2:43 PM / IP Logged Link to Post Post Reply Quote brianh
I can put my key in driver door and hold to lock position , thus rolling both front windows and closing sunroof. I’m looking to put a two window roll up module on the rear windows and a module on the rear window as well. I will be using the orange( ground out while armed) output to control. What’s the best way to send a timed ground output for about 10 seconds to the wire at the driver door key switch to make this happen?
Thanks in advance, Brian
cpalmer 
Copper - Posts: 109
Copper spacespace
Joined: March 18, 2007
Location: United States
Posted: February 21, 2021 at 7:43 PM / IP Logged Link to Post Post Reply Quote cpalmer
Which unit are you using? Some of the newer remote start alarms have the option to trigger wires with timers built in to the unit.
brianh 
Silver - Posts: 516
Silver spacespace
Joined: August 25, 2002
Location: United States
Posted: February 21, 2021 at 8:02 PM / IP Logged Link to Post Post Reply Quote brianh
I just installed a Excalibur RS-475-3D. It has a trunk pop channel and a programmable channel. The wires for factory arm/ disarm can be programmed for channels 4 and 5 but no timer option. I’m guessing I will have to use a TR7 timer or the DEI pulse timer to make this happen.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer