the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5806v Alarm Settings


Post ReplyPost New Topic
< Prev Topic Next Topic >
itolond 
Copper - Posts: 87
Copper spacespace
Joined: February 13, 2016
Location: Singapore
Posted: March 20, 2021 at 7:28 PM / IP Logged Link to Post Post Reply Quote itolond
Hi Forum,
I have the5806v installed and so far all good. The rear cab door is now auto close central lock arm. It takes about 10 secs max to fully close.
How do I place a delay on arm to allow for this ( otherwise I get the door error on remote all the time)
cpalmer 
Copper - Posts: 109
Copper spacespace
Joined: March 18, 2007
Location: United States
Posted: March 22, 2021 at 12:46 AM / IP Logged Link to Post Post Reply Quote cpalmer
Should be a setting to turn off door error chirp.
mgoetz74 
Silver - Posts: 424
Silver spaceThis member consistently provides reliable informationspace
Joined: February 15, 2012
Location: United States
Posted: March 22, 2021 at 9:44 AM / IP Logged Link to Post Post Reply Quote mgoetz74
menu 2-4
The System Features Learn Routine dictates how the unit operates. It is possible to access and change most of the feature settings using the Control Center button.
1. Open a door.
2. Turn the ignition on, then OFF.
3. Select a Menu. Press and hold the Control Center button. The number of siren chirps indicates the Menu number. 1 LED flash and honk indicates Menu 1, 2 LED flashes and honks - Menu 2 and 3 LED flashes and honks for Menu 3.
4. When the desired Menu chirps are heard, release the Control Center button.
5. Select a Feature. Press and release the Control Center button the number of times corresponding to the feature you wish to change. Then press and hold one more time to select the features. Do NOT release the Control Center button.
6. Program the Feature. While holding the Control Center button, you can program the feature using the remote control.
7. The Control Center LED will flash and the siren will chirp the number of times equal to the option. For features with only two options; = option 1, while = option 2. For features with more than two options; selects the options in ascending order, while selects them in descending order.
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer