Anti Grind/Starter Kill Diagram, Two Starter Wires

Home / the12volt's Install Bay / Car Security and Convenience / Anti Grind/Starter Kill Diagram, Two Starter Wires

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pats4life

Member - Posts: 2

Joined: February 13, 2018

Location: California, United States

Posted: April 08, 2021 at 4:51 PM / IP Logged

can someone please tell me or show diagram on how i can wire up anti grind/starter kill if vehicle has 2 starter wire?thanks

Back to Top

davep.

Gold - Posts: 641

Joined: May 27, 2011

Location: California, United States

Posted: April 12, 2021 at 12:31 AM / IP Logged

Use two relays, one for each starter wire.

Key side of starter wire 1 to #87a and #86 of its relay. Car-side of starter 1 wire to #30 of its relay.

Key side of starter wire 2 to #87a and #86 of its relay. Car-side of starter 2 wire to #30 of its relay.

GWA or other (-) trigger when active to both relays' #85.

Back to Top

pats4life

Member - Posts: 2

Joined: February 13, 2018

Location: California, United States

Posted: April 14, 2021 at 12:46 PM / IP Logged

Thank you!!

Do I need diode and If I do which one do I connect them to?

Also I have 1 GWA,can I connect this wire to one of the relay #85 and use a jumper wire to the other #85 of the 2nd relay?

Thank you very much!!

Back to Top

davep.

Gold - Posts: 641

Joined: May 27, 2011

Location: California, United States

Posted: April 20, 2021 at 12:17 PM / IP Logged

”Do I need diode and If I do which one do I connect them to?”

You can use a diode for anti-spike protection for the module. Connect between 85 and 86 of either relay. Band AWAY from the GWA wire, which should go to #85.

”Also I have 1 GWA,can I connect this wire to one of the relay #85 and use a jumper wire to the other #85 of the 2nd relay?”

Yes.

“Thank you very much!!”

You're welcome.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.