the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2016 Ram Promaster City Cargo Van Locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
ramon2001 
Member - Posts: 45
Member spacespace
Joined: August 30, 2006
Location: United States
Posted: April 13, 2021 at 12:59 PM / IP Logged Link to Post Post Reply Quote ramon2001
hello,
im installing avital car alarm to 2016 ram promaster city cargo van i can not get the door locks to work when switch is plugged in. it says to relay isolate the switch. i dont know how to do that. please can any one help me wire this thing.. cant find anything on line that explains it to me. thank you very much for your help. really appreciate it
ramon
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 13, 2021 at 6:42 PM / IP Logged Link to Post Post Reply Quote kreg357
Try this using a SPDT relay :
2016 Ram Promaster City Cargo Van Locks -- posted image.
Soldering is fun!
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 13, 2021 at 7:09 PM / IP Logged Link to Post Post Reply Quote kreg357
Details... While you are cutting the vans Violet/Red Power Lock wire, the vans lock system will still operate normally because the signal will pass through Pins 87a to 30 of the added relay. These pins are N.C. ( normally closed ) while the relay is not energized. When the Avital outputs a (-) Lock signal it will energize the relays coil ( Pin 85 (-) and Pin 86 (+) ). Internally the relay switches the connection from Pin 30 -> Pin 87a to Pin 30 -> Pin 87. This does two things for you. It removes the power door lock switch from the circuit ( isolates it ) and applies a Chassis Ground through the required 1k Ohm resistor to Pin 30 which goes into the BCM and causes the power door locks to Lock.
Soldering is fun!
ramon2001 
Member - Posts: 45
Member spacespace
Joined: August 30, 2006
Location: United States
Posted: May 17, 2021 at 6:44 PM / IP Logged Link to Post Post Reply Quote ramon2001
worked awesome. thank you so much
ramon

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer