2019 Nissan Sentra PTS, Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2019 Nissan Sentra PTS, Remote Start

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

perezjorgejr

Member - Posts: 6

Joined: February 04, 2021

Location: Illinois, United States

Posted: January 30, 2022 at 3:39 PM / IP Logged

Has anyone ran into an issue when installing a remote starter where when you attempt to remote start the car the display says no key found? I installed an Prestige 57TM with an FLCART. The programming sequence when through fine, but the car won't start. I had a similar issue with an 2012 Nissan Altima. I double and triple checked my wiring. The only thing that i noticed was that the instructions ask to use "keyfob1", but I don't know how to tell if the fob im using is keyfob1 and it's the customers only fob.

Thanks !

Jp

Back to Top

djdeito

Copper - Posts: 100

Joined: February 19, 2019

Posted: January 30, 2022 at 10:13 PM / IP Logged

What does the FLCART LED status show when you attempt to remote start the car?

2019 Nissan Sentra PTS, Remote Start -- posted image.

Back to Top

silvercivicsir

Copper - Posts: 402

Joined: November 21, 2003

Posted: January 31, 2022 at 7:40 PM / IP Logged

are you brake lights coming before it attempts to remote start ?

Back to Top

Search for other posts by silvercivicsir

perezjorgejr

Member - Posts: 6

Joined: February 04, 2021

Location: Illinois, United States

Posted: February 04, 2022 at 7:50 AM / IP Logged

He's bring the car back to me this weekend. I'll check for the status lights.. thanks!!

Jp

Back to Top

perezjorgejr

Member - Posts: 6

Joined: February 04, 2021

Location: Illinois, United States

Posted: February 04, 2022 at 7:52 AM / IP Logged

I'm not too sure on the brake light - I'll check it this weekend. Someone else told me that if the Nissan Fob battery is low it can cause issues while programming

Jp

Back to Top

perezjorgejr

Member - Posts: 6

Joined: February 04, 2021

Location: Illinois, United States

Posted: February 09, 2022 at 7:48 PM / IP Logged

So I found that their are two brake switches and I was wired to the wrong one. The customer is bringing his car in Saturday - hopefully switching to the "top" brake switch fixes the issue.

Jp

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.