the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1985 Chevrolet Camaro, Automatic Transmission, Viper 5305V


Post ReplyPost New Topic
< Prev Topic Next Topic >
wyciwug 
Copper - Posts: 156
Copper spacespace
Joined: February 08, 2008
Location: Virginia, United States
Posted: April 17, 2022 at 8:07 PM / IP Logged Link to Post Post Reply Quote wyciwug
HELLO
i am attempting to inatall Viper 5305v Combo System.. I wonder of there is anything special that I need to know before installation?
I Assume I do not need bypasa for the remote start?
THANKS
dcd
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: April 18, 2022 at 1:29 PM / IP Logged Link to Post Post Reply Quote i am an idiot
If this is your key, actions need to be taken. If your key does not have the resistor blister, no action needed.
https://www.americankeysupply.com/product/gm-single-sided-vats-key-p1-15-w-gm-logo-strattec-3133?utm_medium=adwords&%3Futm_campaign=&utm_source=&utm_content=&utm_term=&gclid=Cj0KCQjwmPSSBhCNARIsAH3cYgYJuZhuIdNStXnuM5jinfqgPqJ-tyij9KeVF_Q6NCvyx3JUhwyvkFYaAnyrEALw_wcB&follow_links=1
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
wyciwug 
Copper - Posts: 156
Copper spacespace
Joined: February 08, 2008
Location: Virginia, United States
Posted: April 18, 2022 at 1:45 PM / IP Logged Link to Post Post Reply Quote wyciwug
IT has no resistor, only a metal blade plain key
dcd
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 18, 2022 at 5:11 PM / IP Logged Link to Post Post Reply Quote kreg357
Carb or F.I.?
Soldering is fun!
wyciwug 
Copper - Posts: 156
Copper spacespace
Joined: February 08, 2008
Location: Virginia, United States
Posted: April 18, 2022 at 5:34 PM / IP Logged Link to Post Post Reply Quote wyciwug
SIR
it is Fuel Injector
dcd
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 18, 2022 at 5:57 PM / IP Logged Link to Post Post Reply Quote kreg357
Good, F.I. is expected with remote start systems as there is no easy way to set the carburetors' choke or pump the gas pedal...
Soldering is fun!
wyciwug 
Copper - Posts: 156
Copper spacespace
Joined: February 08, 2008
Location: Virginia, United States
Posted: April 18, 2022 at 6:09 PM / IP Logged Link to Post Post Reply Quote wyciwug
So just straight away follow diagam from directwires?
NO bypass needed for Remote start?
dcd
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: April 18, 2022 at 8:34 PM / IP Logged Link to Post Post Reply Quote kreg357
Pretty much. Some minor issues to deal with.
1. Factory Power locks are (+) and Viper lock outputs are (-). Get a 451M module to handle the conversion.
2. Run in Tach Mode using Tach Signal from coil.
3. Parking Lights are (+) so set Viper 5305 to output (+) Parking Light output via fuse/jumper.
4. There are two ACC ignition wires, Orange & Brown. Set the Viper Pink/White to ACC2 and use it.
5. If the Camaro has a trunk light use it as the Trunk Pin source.
6. If the door pins still work you can use the Dome Light wire as the Viper All Door Pin Input.
If the ignition key does not have the VATS resistor chip on it, no need for a bypass module. You mentioned a plain metal key so you should be good to go.
Soldering is fun!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer