2001 Chevrolet Tahoe, Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Chevrolet Tahoe, Remote Start

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gmcdenali1

Member - Posts: 1

Joined: January 14, 2023

Location: South Carolina, United States

Posted: January 15, 2023 at 3:07 PM / IP Logged

Installed a Excalibur x70 remote start with a fortin PASSLOCK-SL2. v.2. The issue I’m having is that when I go to program the fortin it blinks 5x instead of the 3x blink.Truck will attempt to start in remote start but will not crank. If I try to crank with key between Remote start attempts then leave the key to on position the following remote start attempt will start.

Fortin is wired as follows

Blue- status out from alarm

Orange- orange/black to yellow passlock on ignition key

Black- orange/black on passlock ignition key

Red- 12v battery

Yellow- pink ignition

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.