the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Code Alarm Remote Start F50, 2002 Dodge Caravan


Post ReplyPost New Topic
< Prev Topic Next Topic >
atrevino 
Member - Posts: 9
Member spacespace
Joined: June 28, 2002
Location: United States
Posted: July 05, 2002 at 9:21 PM / IP Logged  

Does anyone know if any of the ignition outputs of a code alarm brand remote start F50, has the ability to act as a pulse instead of a constant  12 VDC. I am having problems with my 2002 Dodge Caravan install. Only with the A/C not coming on. The starting part works fine. However, when the ignition output from the module activates the relay to shunt the starter 2 wire to ground via a 180 ohm resistor, the ignition does not release the relay to allow the radio and A/C to kick on. Any ideas would be greatly appreciated.

Tony
trusdamanr 
Copper - Posts: 116
Copper spacespace
Joined: May 15, 2002
Location: United States
Posted: July 08, 2002 at 12:43 PM / IP Logged  
ok tony i might be able to help you  first   i know you probaly did it but check the resistor make sure its 180 ohms and its not open or shorted    second double check the relay        86--- (-)from the input   85--- +12 volts fused     87--- ground   and 30--- to the 180ohm resistor and to the purple and brown wire at the switch harness...       and if you want change the output from constant to pulse       .
Code Alarm Remote Start F50, 2002 Dodge Caravan -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer