2001 ford focus remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2001 ford focus remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

patmar

Copper - Posts: 69

Joined: August 09, 2002

Location: Quebec, Canada

Posted: December 09, 2003 at 8:22 PM / IP Logged

i just finish installing a remote start(autostart as-1414) on a ford focus 01.when the car is run for few minutes he engines sut off en restrat again. e dut off around 800 rpm

Back to Top

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 09, 2003 at 8:38 PM / IP Logged

hi did you use a bypass module also go into diagnostics mode after it shuts down and see why it shut down. don't shut down with remote or brake let it shut down the way it does when it fails.

good luck

kirk

Back to Top

patmar

Copper - Posts: 69

Joined: August 09, 2002

Location: Quebec, Canada

Posted: December 10, 2003 at 8:40 AM / IP Logged

i thing is the tach signal is is not strong after warm up i use black yellow for tach at coil module

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 10, 2003 at 9:07 AM / IP Logged

You should have used the BLACK/ GREEN at the coil and also the Focus has the E-PATS on it to bypass.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

patmar

Copper - Posts: 69

Joined: August 09, 2002

Location: Quebec, Canada

Posted: December 10, 2003 at 6:34 PM / IP Logged

yes jeff i'm use BLACK/ green on coil but if engine turn around 800rpm the engine shut off. I,m use the auto learn tach and the light goes off and after 30 sec. go on.do you have the info for use a injector or at ecm

Back to Top

patmar

Copper - Posts: 69

Joined: August 09, 2002

Location: Quebec, Canada

Posted: December 12, 2003 at 6:33 PM / IP Logged

thanks you everyody for your help i,m fix problem. signal from coil is too strong for remote starter use a 10k in line tach wire solve my problem.

thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 ford focus remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.