viper 791xv problem

Home / the12volt's Install Bay / Car Security and Convenience / viper 791xv problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ammarsunfire

Member - Posts: 41

Joined: September 01, 2003

Location: Canada

Posted: May 01, 2004 at 9:18 PM / IP Logged

Hi, I have a viper 791xv installed on my 2003 sunfire. It's been wired and fully functional for the last six month. The thing is, this morning when I tried to remote start it wouldn't. The remote will only lock and unlock and that without the remote beeping, I also noticed the led constantly on and only turns off when I start the with the key. I haven't run the diaongnositics yet and have done nothing to my knowledge that should influence this problem. Any help would be greatly appreiated.

Back to Top

Scott35

Silver - Posts: 258

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 02, 2002

Location: United States

Posted: May 01, 2004 at 9:46 PM / IP Logged

Have you checked to see if the valet button got pushed in?

Tacomacrew

Back to Top

ammarsunfire

Member - Posts: 41

Joined: September 01, 2003

Location: Canada

Posted: May 01, 2004 at 9:52 PM / IP Logged

It may have gottan pressed. What would that affect.

Back to Top

Scott35

Silver - Posts: 258

Joined: August 02, 2002

Location: United States

Posted: May 01, 2004 at 9:55 PM / IP Logged

No remote start. Basically what you are describing.

Tacomacrew

Back to Top

ammarsunfire

Member - Posts: 41

Joined: September 01, 2003

Location: Canada

Posted: May 01, 2004 at 10:18 PM / IP Logged

when u say pressed do u mean constantly pushed in or just pressed once. The thing is the valet switch is located in a place where it may have been pressed a couple of times here and there but I never had this problem before. And the LED whats up with that, it's never been constantly illuminated like that before. Anywayzs the alarm is also disengaged which i forgot to mention. If I put it in some sort of mode how do i get out of it. That for ur input

Back to Top

lilwayne23

Member - Posts: 22

Joined: February 25, 2004

Location: United States

Posted: May 10, 2004 at 7:51 PM / IP Logged

Its in valet mode. If you open a door and press lock, unlock, then lock again it should come out of valet mode and vice versa to put it back. The same thing happened to me and I thought I had messed something up. But mine did still remote start.

lilwayne

Back to Top

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: May 10, 2004 at 10:03 PM / IP Logged

seems your alarm is in valet mode you could diengage valet like lilwayne23 explained to your via the valet button, all this is in your owners manual,

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 791xv problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.