Localte the tacho wire for Dodge Intrepid

Home / the12volt's Install Bay / Car Security and Convenience / Localte the tacho wire for Dodge Intrepid (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ivanca

Member - Posts: 34

Joined: May 18, 2004

Location: Canada

Posted: May 18, 2004 at 12:48 AM / IP Logged

I am installing the remote start for my car DODGE INTREPID 2002

On the service manual, the tacho wire should be the TAN/ STRIP. But I see there are only 2 wires connect the coil pack. One is dark green color, another one is WHITE/ tan color. Which one is the right one? Or do I get the wrong wire? Are there only 2 wires on COIL PACK?

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: May 18, 2004 at 2:07 PM / IP Logged

*5 This vehicle has an ignition coil for each cylinder. For tach use a tan/stripe wire at any one of the coils.

look at the wires goes to each coil on the head where the spark plugs are at. thats my guess....

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Localte the tacho wire for Dodge Intrepid

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.