viper 791 H2 wiring

Home / the12volt's Install Bay / Car Security and Convenience / viper 791 H2 wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Flymase

Member - Posts: 5

Joined: August 06, 2004

Posted: August 16, 2004 at 10:45 PM / IP Logged

My secondary harness doesn't match what's in my manual. My harness goes as follows: (the manual uses the same colors but is a different order)

h2/1- light green black

h2/2- grey/ black

h2/3- GREEN/ white

h2/4- violet/ black

h2/5- WHITE/ black

h2/6- light blue

is my harness set up correctly and there is an error in the manual. I just want to make sure that I'm making the right connections especially when it is dealing with disarming my factory alarm.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 16, 2004 at 11:25 PM / IP Logged

Easy way to triple check is to check the diagram on the back of the brain as well. I have had some harness miss pinned, it does happen.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Flymase

Member - Posts: 5

Joined: August 06, 2004

Posted: August 17, 2004 at 7:47 AM / IP Logged

There is no diagram on the back of my brain. According to my manual H2/1 and H2/6 are correct should i ignore the colors for the other wires and line them up with the pin diagram in the book.

mobilevt

Copper - Posts: 73

Joined: October 29, 2003

Location: Washington, United States

Posted: August 17, 2004 at 9:45 AM / IP Logged

I got a Chevy Silverado 1500HD LS Crew Cab here to be installed with a Viper 791XV. Is the truck sensitive to what kind of window roll up module and passlock module it can use? I went and ordered a 555L for the bypass and 2 Smart window roll up module from asianwolf.com. Will they work fine?

Sean - EVConcepts

Emergency Vehicle Technician

Got Freedom? Thank a vet!

Flymase

Member - Posts: 5

Joined: August 06, 2004

Posted: August 18, 2004 at 4:50 PM / IP Logged

Any suggestions?

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: August 18, 2004 at 4:56 PM / IP Logged

for disarm wire, it shows (-) when unlock. check it w/ a DMM.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Flymase

Member - Posts: 5

Joined: August 06, 2004

Posted: August 18, 2004 at 5:04 PM / IP Logged

the wires on the harness won't read anything with a dmm. Profuse do you understand the problem that I have. My H2 harness is not wired up like it's suppossed to be.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: August 18, 2004 at 5:24 PM / IP Logged

its only a diagram. but what i was sayin is that, out of those 6 wire, theres a disarm wire.

to confirm, the h2/1 is disarm wire. but if you want to be anal, test all 6 wires to make sure which give (-) when unlock.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

BuckCJ85

Member - Posts: 3

Joined: July 17, 2004

Location: United States

Posted: August 18, 2004 at 5:55 PM / IP Logged

Search. I had the same question a while back. The harness is correct from the factory. The pins are misprintet in the beginning of the installation manual. The colors/uses are right, the pins wrong. The overall diagram in the back of the book is correct and is identical to how the harness comes.

Flymase

Member - Posts: 5

Joined: August 06, 2004

Posted: August 19, 2004 at 10:39 AM / IP Logged

Thanx buckcj85 I see that now. I appreciate the help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 791 H2 wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.