the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

97 civic OEM keyless alarm system diagram


Post ReplyPost New Topic
< Prev Topic Next Topic >
wojo97civic 
Member - Posts: 11
Member spacespace
Joined: October 28, 2004
Location: United States
Posted: October 28, 2004 at 11:35 PM / IP Logged  

The green connector that connects into the stock OEM head unit, i need the diagram of all wires that connect into that green connector has coming to it, i am going to try to install an alarm using those wires if that is possible can someone lead me into the right direction this is my first installation of a car i have gone to the diagrams and downloaded everything i just need to know where to put the wires from the new alarm system i have into the old OEM alarm system.

tbirdman74 
Copper - Posts: 164
Copper spacespace
Joined: August 22, 2003
Location: United States
Posted: October 29, 2004 at 12:18 AM / IP Logged  
12volts  white (40A)   +   ignition harness 
Starter  BLACK/ white   +   ignition harness 
Second Starter  N/A       
Ignition  BLACK / YELLOW   +   ignition harness 
Second Ignition  N/A       
Third Ignition  N/A       
Accessory  yellow   +   ignition harness 
Second Accessory  WHITE/ black   +   ignition harness 
Keysense  blue/white to blue/red   -   ignition harness 
Power Lock  GREEN / WHITE   -   driver kick, blue plug 
 Notes: Also found in the green factory alarm plug located behind the radio.
Power Unlock  GREEN/ orange   -   driver kick, blue plug 
 Notes: Also found in the green factory alarm plug located behind the radio.
 Use blue / YELLOW to unlock the driver door only.
Lock Motor  WHITE/ red   5wi  driver kick, door harness 
Unlock Motor  blue/red to yellow/red   5wi  pwr door lock ctrl unit in driv door
Parking Lights+  RED / black   +   driver kick, fuse box 
 Notes: Male blade terminal at fuse box. Also at the back of the dimmer  switch.
Parking Lights-  N/A       
Hazards  same as turn signal wires       
Turn Signal(L)  GREEN/ red   +   steering column 
Turn Signal(R)  GREEN/ YELLOW   +   steering column 
Reverse Light  GREEN/ black   +   driver kick, harness to rear 
Door Trigger  lt. GREEN/ red   -   factory alarm plug 
 Notes: Also found in the green factory alarm plug located behind the radio.
 Can also be found in a light green plug above the fuse box or bottom of  driver kick, harness to rear.
Dome Supervision  lt. GREEN/ black   -   driv A pillar or factory alarm plug 
Trunk/Hatch Pin  blue/black   -   driver kick, harness to rear 
 Notes: Also found in the green factory alarm plug located behind the radio.
Hood Pin  N/A       
Trunk/Hatch Release  N/A       
Power Sliding Door  N/A       
Factory Alarm Arm  factory remote only       
Factory Alarm Disarm  factory remote only       
Disarm No Unlock  factory remote only       
Tachometer  blue   ac   test tachometer connector 
 Notes: Driver side fire wall under hood.     
Brake Wire  GREEN / WHITE   +   brake pedal switch 
Parking Brake  RED / green   -   parking brake switch 
Horn Trigger  blue to gray   -   steering column 
 Notes: Also found in the green factory alarm plug located behind the radio.    
 Immobilizer Bypass Module: Required: No Type: N/A Part #: N/A
If it don't fit, Force it.
If it breaks, You needed a new one anyway!
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: October 29, 2004 at 1:31 AM / IP Logged  
Not all the wires you will be needing will be at the plug behind the radio, but most will. Just follow the diagram above and you will be fine.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
wojo97civic 
Member - Posts: 11
Member spacespace
Joined: October 28, 2004
Location: United States
Posted: October 29, 2004 at 10:58 AM / IP Logged  
thanks if i have any other questions ill ask
wojo97civic 
Member - Posts: 11
Member spacespace
Joined: October 28, 2004
Location: United States
Posted: October 30, 2004 at 6:21 PM / IP Logged  

i ran into my problem, after all my trial and error, i have yet to have my sercurity system to work, i bought this alarm system off ebay called "Option Group" Keyless Car Alarm System.  I was looking at all the diagrams where to place all the wires and i couldnt figure it out.  Here is a layout what the manual gave me http://www.lickmyupload.us/upload/Diagram.jpg, you just have to zoom in to see the diagram, i used the tbirdman74 setup, but i have had no luck and someone please tell me what wires i have too hook up from the diagram to my cables in my car. this is my first install too so any help would be great! thanks again

wojo97civic 
Member - Posts: 11
Member spacespace
Joined: October 28, 2004
Location: United States
Posted: October 30, 2004 at 6:23 PM / IP Logged  

OH MY GOD DONT LOOK AT the upload!

wojo97civic 
Member - Posts: 11
Member spacespace
Joined: October 28, 2004
Location: United States
Posted: October 30, 2004 at 6:26 PM / IP Logged  
does anyone know how i can upload the picture my friend played a trick on me! damn it!  DO NOT LOOK AT PICTURE VERY GRAPHIC!
wojo97civic 
Member - Posts: 11
Member spacespace
Joined: October 28, 2004
Location: United States
Posted: October 30, 2004 at 6:45 PM / IP Logged  
http://tinypic.com/f6grc THIS iS THE REAL PHOTO SORRY ABOUT THE OTHER ONE

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer