clifford avantguard 4 won,t chirp

Home / the12volt's Install Bay / Car Security and Convenience / clifford avantguard 4 won,t chirp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mystic-rallye

Member - Posts: 20

Joined: November 26, 2004

Location: Netherlands

Posted: December 27, 2004 at 12:00 PM / IP Logged

I,ve got my AG4 fitted for a week now but now it won,t chirp when the alarm get,s armed or disarmed..

this happened after I use the short stop function with my door open.

after I take my key,s out of the ignition and close all doors it doesn,t want to arm the alarm.

so I push different buttons on both the remotes but it won,t arm.

after I take it off the short stop function and parked my car and arm the alarm it doesn,t chirp anymore what have I done now???

first I thought it was on silent night but this on clear daylight..

then I thought I programmed the siren on silent..

also wrong but when I entered the programming mode the light lights up but also no chirps and when I push the switch for program the chirps I heard nothing and after a few seconds it give me the 3 chirps (so you can program something else) but it will still give no program chirps.

and no arm/disarm chirps..

did I have fried the brain or something like that???

greets mischa b

Mystic-rallye

Member - Posts: 20

Joined: November 26, 2004

Location: Netherlands

Posted: December 27, 2004 at 1:32 PM / IP Logged

who can help me out????

greets mischa b

gfella2000

Member - Posts: 28

Joined: December 07, 2004

Location: United States

Posted: December 27, 2004 at 1:45 PM / IP Logged

Have you checked to see if it is in valet mode

gfella 20000000000

Mystic-rallye

Member - Posts: 20

Joined: November 26, 2004

Location: Netherlands

Posted: December 27, 2004 at 2:55 PM / IP Logged

yep it isn,t (I suppose) the led flicker,s normally and it gives the normal warn away chirp..

I think it,s a difficult problem clifford avantguard 4 won,t chirp -- posted image.

greets mischa b

oruberz

Member - Posts: 5

Joined: December 25, 2004

Location: United States

Posted: December 27, 2004 at 9:31 PM / IP Logged

i know what you mean. the same thing happened to me, except that this happened when the master remote went ker-plunk. after that no arm/disarm chirps with the companion remote. i tried programing another master remote ,but the alarm did not give me the programing chirps. the alarm works fine other than that, but if i can't get the programing chirps back i will probably have to change it to a concept 400 that's in my closet, before the companion remote goes out and i can't program another one. i haven't tried, because i do not own a cliffnet wizard, to program it this way.

omz

Mystic-rallye

Member - Posts: 20

Joined: November 26, 2004

Location: Netherlands

Posted: December 28, 2004 at 12:17 PM / IP Logged

hhhmmm so I think the best I can do is go to the clifford dealer and hang on the cliffnet wizard..

greets mischa b

scirocco16v

Copper - Posts: 112

Joined: October 27, 2003

Posted: December 29, 2004 at 10:14 PM / IP Logged

The self powered sirens stopped chirping if the internal battery dies. The older ones seemed to have this problem more then the newer ones, however it sounds like the problem you are having. The bottom line is that your siren probably needs to be replaced and it could just be a coincidence that it happened when it did. the part should also be warrantied if the alarm was bought as new.

Mystic-rallye

Member - Posts: 20

Joined: November 26, 2004

Location: Netherlands

Posted: December 30, 2004 at 9:53 AM / IP Logged

but why can,t I arm the alarm after pushing the manual override button and the engine also stay running??

Mystic-rallye

Member - Posts: 20

Joined: November 26, 2004

Location: Netherlands

Posted: January 06, 2005 at 11:58 AM / IP Logged

my siren is was the chirp problem and the problem with manual overide is the interior blower.

when the blower is working on level 3 then it will produce a shield that blocks the signal of the remote.

I just can use the transmitter to a very close distance when the blower is on 3 (so I just put it just to the first level clifford avantguard 4 won,t chirp -- posted image. )

THANX to all

greets mischa b

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford avantguard 4 won,t chirp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.