01 chevy express van passlock 2

Home / the12volt's Install Bay / Car Security and Convenience / 01 chevy express van passlock 2 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stevesa

Member - Posts: 2

Joined: January 04, 2004

Location: United States

Posted: February 11, 2005 at 11:36 PM / IP Logged

Please Help!!!, I have installed at least 50 remote starts and about half of those have had the passlock 2 system on them and i have never had a single problem. This van is killing me. the remote start is a crimestopper and the passlock module is a design tech, which i have always used, after everything is connected the van will start with the key but as soon as you try to remote start it will not start and the security light flashes, after resetting the security light it will start with the key again. I have checked my wires and conections at least fifty times and i have swapped both the brain for the rs and the bypass module with new ones and i stll get the same results, the ground and the voltage measures where it is supposed to be. any suggestions.

thanks in advance for any help

stevesa

Back to Top

jaurora

Silver - Posts: 429

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 16, 2004

Location: United States

Posted: February 12, 2005 at 3:43 PM / IP Logged

The only thing I can think of is that you possibly grabed the wrong ign wires. Give mr the model of the vehicle and mabey I can help.

MECP certified (If it really means anything)

Jeremy

Back to Top

stevesa

Member - Posts: 2

Joined: January 04, 2004

Location: United States

Posted: February 12, 2005 at 4:14 PM / IP Logged

It is a 01 chevy express van, the funny thing here is, if you put a resistor in line and totally bypass the passlock system it wont even start with the key, I just found that if the passlock is activated I am getting the same resistance as it is when the passlock working properly.

Back to Top

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 12, 2005 at 8:58 PM / IP Logged

Common mistakes on these.

Taking the wrong yellow for the passlock 2

Taking the wrong white for passlock two.

Not powering up the correct ignition wires DURING start.

Recheck your ignition vs accessory wires.

I find that the 555L works great.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01 chevy express van passlock 2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.