Viper 560XV Trouble

Hi, I just installed a Viper 560XV remote starter alarm and everything seems to work except the parking light flash and the big thing is as soon as I pop in the fuse the alarm starts chirping and carrying on at a barely audible volume. Everything else seems to work like the door locks and start and run feature. Any Ideas would be greatly appreciated. Thanks

I forgot to mention this is on a 2000 Chevy Silerado Pickup. Thanks again

sounds like youre losin ground. the parkin light flash???? do you mean it flashes when RS? if so, thats how it it. Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

The parking lights don't flash when the unit is armed but for now I just unhooked them to see if it would make the siren quit chirping. It didn't I also checked the ground and then grounded to another location with the same results, as soon as I pop the fuse in for the unit the siren starts chirping. Thanks Again

so the parkin light dont flash at all? if not, make sure you cehck if its right wire. the viper white parking wire is polarity selectable and its (+), at default. as for the siren goin off, you prolly armed it b4 takin the fuse out.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Thank you Oh so very much for the help Profuse007. I got the parking lights working but I still can't get that siren to quit no matter what I do. The funny thing is you can just verily here it. If you're in the pickup you can here it at all hardly. Thanks again

have you check ground for siren and input(brown from 560xv) for siren?Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

I tried a different siren and now it is loud like it should be but it I still can't get the siren to shut off is there a command I'm missing?