viper 560, 95 range rover country

i put in a viper 560 alarm in a 1995 range rover.the factory alarm keeps honking the car horn when i disarm the viper.then the drivers door key will not shut it off,i have to go to the passenger door?any info,wiring diagrams?help? also now the factory door locks stopped working.i hear the relays clicking under the passenger dash,no fuses blown?

|       POWER LOCK|yellow/red *1       | type F |either kick                 | |     POWER UNLOCK|yellow/red (same)   |F |either kick                 | 1 Or yellow/orange. This system unlocks the doors with a (-) pulse, and locks the doors when this wire is broken. Cut the wire, and wire a relay as follows: 85-(-) lock, 86-12V constant fused, 87A to one side of the yellow/orange, 30 to the other side of the yellow/orange AND (-) unlock from the alarm. Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

yes we did it that way.now the door locks will not work and the factory security system is being armed when we disarm the viper?

step back w/ the doorlock, have you taken the wires out and reconnect them to see if it works on its own w/o the viper?Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

yes,i put it back to stock and the locks will not work.no blown fuses either.i hear the relays clicking under the passanger side dash.got a print of the cars electrical circuit.do you know what color and where to find the factory alarm bypass?