1996 Mercury Villager

Home / the12volt's Install Bay / Car Security and Convenience / 1996 Mercury Villager (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

swfx

Member - Posts: 20

Joined: April 10, 2005

Location: United States

Posted: May 10, 2005 at 2:33 PM / IP Logged

Can someone please help me with the door trigger and rear hatch trigger on this vehicle? I know the wire colors and I have probed almost every single wire matching the description with no success. Where are these wires on this vehicle? Please don't say driver's kick panel because that is where I have been checking. Please be as specific as possible if you have done one of these vans before. Thank you.

Back to Top

swfx

Member - Posts: 20

Joined: April 10, 2005

Location: United States

Posted: May 10, 2005 at 3:23 PM / IP Logged

Yes I did search for this car. The other post is a totally seperate issue which I'm not getting a response on. Thanks for this response though.

Back to Top

swfx

Member - Posts: 20

Joined: April 10, 2005

Location: United States

Posted: May 10, 2005 at 3:46 PM / IP Logged

I specified that I knew the color and the location. Have you installed an alarm on this vehicle? If you have then you know that there are about 10 RED / White wires in the driver kick panel. I have metered every single one of them and none of them react to the door trigger. That is why I am asking for help. The same thing with the Lt BROWN / White in the driver's kick panel for the rear hatch trigger.

Anyone who has installed an alarm on this vehicle...please help me.

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: May 10, 2005 at 4:01 PM / IP Logged

How about this:

Dome Light	WHITE (-)	AT "SMART ENTRY CONTROL TIMER" *
Trunk Pin Switch	BROWN / WHITE (-)	AT "SMART ENTRY CONTROL TIMER" *
Parking Lamp	ORANGE / BLACK (-)	AT HEADLIGHT SWITCH **

* "Smart Entry Control Timer" Located Behind Driver Dash To Right Of Steering Column. ** ORANGE / BLACK (-) At Headlight Switch Is Output From Headlight Switch To Taillight Relay At Interior Fuse Panel. Output From Relay To Park Lights Is PINK/BLUE (+) Or PINK/WHITE (+) At Interior Fuse Panel.

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

swfx

Member - Posts: 20

Joined: April 10, 2005

Location: United States

Posted: May 10, 2005 at 5:25 PM / IP Logged

Thanks Mo. I wish you were in the same timezone as me because you are always so helpful. So with (+)Park Light output from alarm, I should connect to Pink Blue right? That is where I have it hooked up now. Thanks again for the alternative spots. The RED / White wires for door trigger all sucked!

Back to Top

swfx

Member - Posts: 20

Joined: April 10, 2005

Location: United States

Posted: May 10, 2005 at 9:37 PM / IP Logged

Problem solved. Alarm installed and working great! Mo is the best! Everyone should try and be as helpful as Mo.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1996 Mercury Villager

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.