the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Remote start on 06 Infiniti M45


Post ReplyPost New Topic
< Prev Topic Next Topic >
rabenoja 
Copper - Posts: 61
Copper spacespace
Joined: April 28, 2004
Location: United States
Posted: June 06, 2005 at 8:20 PM / IP Logged  

Anyone done one of these yet?  I know the wiring is similar to the new maximas but, what do you do about the immobilizer/key fob?

dare_ds69 
Silver - Posts: 419
Silver spacespace
Joined: January 25, 2005
Location: New Jersey, United States
Posted: June 07, 2005 at 6:12 AM / IP Logged  
use the valet key and 556u it works.
how own your mind, control your life.
MECP certified. always use a DMM
rabenoja 
Copper - Posts: 61
Copper spacespace
Joined: April 28, 2004
Location: United States
Posted: June 07, 2005 at 9:45 PM / IP Logged  

Will the push button start work with the valet key in the car?

I wouldn't want to have someone break in and just step on the brake and push the button, due to the valet.

Thanks.

Montrealler 
Copper - Posts: 155
Copper spacespace
Joined: October 05, 2002
Location: Canada
Posted: June 08, 2005 at 10:50 PM / IP Logged  
BY the way the valet key will not work ! It is good to open the door glove box and trunk only
I did this one today.
Dismount the key fob, open the part with the key lock (plastic snap) too you will have 3 plastic pieces total. Inside the third plastic piece you will find a philips transponder. Use this one next to the key port with a regular key box. Re assemble the remote and give it back to the customer.Do not try to leave it in the car cause you wont be able to lock the car anymore.
Then you may use the start wire on the brake pedal(pink/ blue for brake light) Brake wire from remote starter will go on the pink/blue wire that is not actuating the brake ligh , the brown yellow as ignition (behind key port) and negative pulse(converted from start wire on the BROWN / white wire at the push button.
To allow the customer to go with the car without re-starting i set up a latching on the ignition (brown yellow) behind keyport activated by the unlock button on the starter remote. The unlatch will be done caus one side both of my relay for latch are feed with the white wire (true ignition) from the driver kick panel fuse box.
Anyway I think I told you enough to put you on the track
rabenoja 
Copper - Posts: 61
Copper spacespace
Joined: April 28, 2004
Location: United States
Posted: June 10, 2005 at 9:08 PM / IP Logged  
Thanks, just what I needed!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer