How do i install L.E.D Scanner?

Home / the12volt's Install Bay / Car Security and Convenience / How do i install L.E.D Scanner? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hoking

Member - Posts: 27

Joined: February 09, 2005

Location: Canada

Posted: June 24, 2005 at 5:59 PM / IP Logged

I have a Compustar, how do i wire up a L.E.D scanner into the system?

Michael Chan

04' Subaru Forester 2.5XS

Compustar 2W8000FMR

Alpine SWR-1241D

Alpine MRD-M500

Back to Top

OhioMike1101

Silver - Posts: 343

Joined: August 22, 2004

Location: United States

Posted: June 24, 2005 at 7:46 PM / IP Logged

usually they come with

12V -

GND

and a trigger wire.

Back to Top

accord78

Copper - Posts: 97

Joined: February 23, 2005

Location: United States

Posted: June 26, 2005 at 8:29 AM / IP Logged

the scanner should have this wires

1. red = 12v-

2. black = ground

3. yellow = is ground when armed input or any negative input

most of the time in the alarm modules is the "orange" wire ground when amred

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How do i install L.E.D Scanner?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.