actuator and alarm wiring

Home / the12volt's Install Bay / Car Security and Convenience / actuator and alarm wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mikemoto81

Member - Posts: 2

Joined: February 26, 2006

Location: United States

Posted: March 01, 2006 at 2:50 AM / IP Logged

Ok i have after market door lock system. Each actuator has 5 wires coming out from them, and connected to a relay for "central locking". That works fine, i just need help on which wires to connect them to from the alarm. The alarm has an onboard relay for the door locks as well.

Wires i have from the actuators are purple (lock), brown (unlock), red (?), blue (?), and black (ground). From the alarm i have a wire for domelight supervision relay input #87, lock #87a normally closed, lock #30 common (output), lock #87 normally open (input), unlock #87a normally closed, unlock #30 common (output)m and unlock #87 normally open (Input).

I have a 2005 toyota tacoma, and the alarm system is a Python 700, CAn someone please guide me in the right direction to where i should connect each wire?

Your help is appreciated

-mike

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: March 01, 2006 at 9:12 AM / IP Logged

There is probably 2 wires from your C / L Relay that, when each is pulsed to GROUND will Lock & UNLOCK the doors. If it is SPAL they should be BROWN & WHITE.

You would then hook your LOCK & UNLOCK wires from Python to those wires

Python:

Lock:

GREEN / Black = Lock wire

WHITE / Black = N/C

VIOLET / Black = GROUND

Unlock:

BLUE / Black = Unlock wire

BROWN / Black = N/C

VIOLET = GROUND

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

mikemoto81

Member - Posts: 2

Joined: February 26, 2006

Location: United States

Posted: March 01, 2006 at 1:28 PM / IP Logged

great, thats exactly what i needed.... thank you soo much!

-mike

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

actuator and alarm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.