Keyless Entry, 1986 Corvette?

Home / the12volt's Install Bay / Car Security and Convenience / Keyless Entry, 1986 Corvette? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dj hellfire

Member - Posts: 39

Joined: March 21, 2004

Location: United States

Posted: March 03, 2006 at 9:19 PM / IP Logged

Anyone installed keyless entry on an 86 Vette or similar? I was trying to figure out the door lock circuit to wire into the keyless entry module. I looks like I will have to cut a couple of the Vettes lock motor wires and connect each end to a wire on the keyless entry module. Anyone familiar with this? It seems to use 5 wire door lock circuits at each door activated by lock motors, no relay.

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: March 03, 2006 at 9:31 PM / IP Logged

Power Lock	LIGHT BLUE	DRIVER KICK PANEL, MUST TEST
Power Unlock	BLACK	FROM PASSENGER SWITCH

Reversal Rest At Ground Door Locks

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Keyless Entry, 1986 Corvette?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.