the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

93 Silverado keyless/alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
kalin1210 
Member - Posts: 4
Member spacespace
Joined: March 04, 2006
Location: United States
Posted: March 05, 2006 at 8:54 PM / IP Logged  

HI i am a newb here,

I was wondering if anyone can tell me what wires i need to cut and splice into my power door lock. I have a type C . My alarm is a Nitro BMW 422. I cannot find any information to manufacture tech line. My alarms door lock wires are blk, grn, pink, white, purple, orange

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: March 05, 2006 at 9:11 PM / IP Logged  

By your description of your lock/unlock wires from your alarm, sounds like it has built in relays.... You should see things like N.O., N.C., Common. These represent the pins on a relay.

Power Lock lt. blue    either door boot   93 Silverado keyless/alarm -- posted image.
Power Unlock BLACK/ red    either door boot   93 Silverado keyless/alarm -- posted image.

take the commen to the solenoid side of the lock/unlock wires. The N.C. to the switch side of the same wires. The N.O. to 12 volts. These wires should allready have a fuse inline....correct? 

kalin1210 
Member - Posts: 4
Member spacespace
Joined: March 04, 2006
Location: United States
Posted: March 06, 2006 at 6:48 AM / IP Logged  
nope no inline fuse.
kalin1210 
Member - Posts: 4
Member spacespace
Joined: March 04, 2006
Location: United States
Posted: March 06, 2006 at 6:52 AM / IP Logged  

Sorry i am still kinda confused. maybe you can break it down for me.

blacklock #87a NC

Greenlock #30 Common (output)

Pinklock #87 N.O (input)

White Unlock #87a N.C

Purple unlock #30 Common (output)

Orange unlock #87 N.O (input)

mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: March 06, 2006 at 8:47 AM / IP Logged  

Cut Vehicle Lock & Unlock wires in Half.

One side of cut Wires go to Switch
One side of cut Wires go to Motor ( Actuator )
The way you would tell, is to Press Door Switch and Meter Cut Wires.  The Wires that show 12 Volt + when Pressing Switch are the Switch Side.
Wire as Posted

blacklock #87a NC  =  Switch Side

Greenlock #30 Common (output)  =  Motor ( Actuator ) Side

Pinklock #87 N.O (input)  =  12 Volt Constant +

White Unlock #87a N.C  =   Switch Side

Purple unlock #30 Common (output)  =  Motor ( Actuator ) Side

Orange unlock #87 N.O (input)  =  12 Volt Constant +

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
gus1 
Gold - Posts: 1,013
Gold spacespace
Joined: October 15, 2003
Location: Canada
Posted: March 06, 2006 at 9:23 PM / IP Logged  
And, the easiest place to get your doorlock wires is under the driver's side dash speaker. Pull speaker, feel behind insulation, that is the driver's door harness.
I usually strip the ORANGE / black that is in there (12V), then will cut the light blue, and tap one of the cut sides to 12V. Big spark, no lock movement, you just found the switch side. I know, highly un scientific and all, but hey, it's easy, quick, and you have a 50% chance of getting it right the first time.
It is the down and dirty method, but works. May blow fuse for the doorlocks (Dodges), but, you know you have the switch side. Funny thing about metering it..... because the switches provide the ground.... YOu can press the switch, and get 12V on both sides of the cut. Depends on if you are passenger master, or driver master.
Gus
Wherever I go, that is where I end up......
kalin1210 
Member - Posts: 4
Member spacespace
Joined: March 04, 2006
Location: United States
Posted: March 07, 2006 at 9:09 PM / IP Logged  

Many thanks all. When this weekend comes i will get down to business.

lowfat 
Member - Posts: 11
Member spacespace
Joined: August 17, 2004
Location: United States
Posted: March 09, 2006 at 2:09 PM / IP Logged  
can anybody help me on this.I seem to have the same problem.I have a 92'full size chevy blazer 2 door,it says I need the 5 wire hook up and I have tried that it only locks but does not unlock, I can feel the relay working but the unlock won't work.it says I need to reverse the polarity on the unlock,does anybody know how to do this I would appreciate any kind of help,thanks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer