2005 Dodge Ram, door locks, 997 Prestige?

If you take a look at this document under type H it will give you a diagram of how to hook up your door locks the manual is written for DEI products so ignore the colors listed for lock and unlock triggers. Just apply the negative outputs from your APS997 to trigger the relays. Your parking lights use a similar setup, but your APS997 has an internal relay for parking lights, you would hook your RED / white (parking light supply) to ground and the white (parking light output) with a 560ohm resistor inline to the truck's parking light wire (WHITE/ light green at switch). Hope this helps