2005 Altima tach wire

Home / the12volt's Install Bay / Car Security and Convenience / 2005 Altima tach wire (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jones100001

Member - Posts: 42

Joined: November 15, 2004

Posted: September 03, 2006 at 9:42 PM / IP Logged

Can I tap tach wire any other location besides ignition coil? Preferably behind instrument cluster.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 04, 2006 at 12:30 AM / IP Logged

behind the glove box.....WHITE/ green, @ the ECM.....

jones100001

Member - Posts: 42

Joined: November 15, 2004

Posted: September 04, 2006 at 1:01 PM / IP Logged

Can someone else comfirm this? I did find GREEN / WHITE but not WHITE/ green

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 04, 2006 at 1:05 PM / IP Logged

Its actually UNDER the glove box, behind the heater motor. and theres also a white wire there that can be used as well. same location...

jones100001

Member - Posts: 42

Joined: November 15, 2004

Posted: September 04, 2006 at 1:12 PM / IP Logged

any white wire? because I see bunch of plain white wires

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 04, 2006 at 10:44 PM / IP Logged

jones100001 wrote:

any white wire? because I see bunch of plain white wires

No, use the one that "tests" for tach.... 2005 Altima tach wire -- posted image.

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: September 05, 2006 at 9:27 AM / IP Logged

jones100001,kartuneman,

don't use the WHITE/ green tach at the ecm for this vechile. there was a service bulletine up that using the tach behind the glove box will cause the sevice engine light to come on. the warning did not come up on astroflex, but is indicated on directed. use the the non common injector wire instead. i have not seen it myself, but sometime it's better to advoid if the warning is there.

Be careful whose advice you buy, but be patient with those who supply it. 2005 Altima tach wire -- posted image.

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 05, 2006 at 12:13 PM / IP Logged

thepencil wrote:

jones100001,kartuneman,

Good to know, thanks pencil!

jack987

Member - Posts: 5

Joined: December 29, 2003

Location: Canada

Posted: October 26, 2006 at 6:04 PM / IP Logged

Just cost me $62.00 at the dealer, to here him tell me that the "service engine soon" light was on due to the fact that someone had connected the remote starter to the the fuel injection. The code the Ecm was giving was P0174 - System to Lean: (Bank 2).

So my question now is where do I plug my tach wire so that the ecm doesn't freak out?

I don't want to pay $62.00 everytime that light comes on.

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: October 26, 2006 at 8:52 PM / IP Logged

Two of our biggest dealers we service are Nissan dealers. We've had tach issues on the dam things since i can remember. Funny, you'll use a coil wire on one and it works, get the same model car the next day and only a fuel injector will work. We finally went tachless on them all, had no problems since....

Mike M2

Tech Manager

CS Dealer Services

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.