the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1998 buick lesabre key bypass


Post ReplyPost New Topic
< Prev Topic Next Topic >
bry_gordan 
Member - Posts: 34
Member spacespace
Joined: November 01, 2005
Location: United States
Posted: October 23, 2006 at 12:40 PM / IP Logged  
i found a orange sleave with 2 white wires i have a blue piont smart meater mt454 how do you test the wire to bypass the vatts do you cut the white wire and and put the doiad in
Brian Gordan
john ogrady 
Copper - Posts: 82
Copper spacespace
Joined: February 25, 2006
Location: Canada
Posted: October 25, 2006 at 4:59 PM / IP Logged  

you will have to measure the resistance of the black resistor pellet in the ignition key with a ohm meter.Then find a resistor of this value.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer