2003 Lexus Es300 Remote Start/Keyless

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Lexus Es300 Remote Start/Keyless (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lsondubz

Copper - Posts: 193

Joined: September 20, 2005

Posted: November 07, 2006 at 9:31 PM / IP Logged

A buddy of mine picked up his new car and wants me to install a basic remote start and keyless entry into it. It is a 03 Lexus Es300...I checked the directechs and it doesnt look too horrible, just have to go into the door for the locks which is a small pain, anyone else that has worked on these have any input? How bad are they?, Any problems? Room under the dash? I was just wondering before I agreed to do it this weekend...THANKS ALOT

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 08, 2006 at 1:49 PM / IP Logged

use a TOYDL and say yourself a lot of hassle

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

lsondubz

Copper - Posts: 193

Joined: September 20, 2005

Posted: November 08, 2006 at 3:23 PM / IP Logged

I checked on bypasskit.com and it didnt list that it worked on the 03ES300...They do have a data transponder bypass though which is nice...Does anyone know if the TOYDL will work for sure and if it will, will I still have to use a 556U (since I already have them) for this car or would I be better off with the data bypass?

Back to Top

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 08, 2006 at 3:37 PM / IP Logged

TOYDL is for doorlocks only

for a bypass i always use a TBK IV on Lexus... fits around the ign switch light pipe like a charm....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

lsondubz

Copper - Posts: 193

Joined: September 20, 2005

Posted: November 08, 2006 at 4:36 PM / IP Logged

I was planning on just using a 556U for the transponder bypass since I have plenty of them...Unless there is something else that makes it worth the while to change to...Will the TOYDL do factory disarm with doorlocks?

Back to Top

dangtong972

Member - Posts: 5

Joined: February 24, 2006

Location: United States

Posted: November 17, 2006 at 1:50 PM / IP Logged

I used 555XW for bypassing on the same exact car. Little expensive but not sacrifying a spare key. and very easy to program Use the ignigtion key light wire to disarm factory while starting.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Lexus Es300 Remote Start/Keyless

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.