the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

DEI, Viper remote starts


Post ReplyPost New Topic
< Prev Topic Next Topic >
angelars 
Copper - Posts: 176
Copper spacespace
Joined: November 06, 2006
Location: United States
Posted: November 13, 2006 at 12:10 PM / IP Logged  
We need to double check something on the Viper remote starts (all models). They have a orange wire which feeds the blower motor. Does that get its power from the RED / white? The RED / white just says "connection for high current outputs" in the instructions. Where is the best place to connect this (RED / white) wire to?
lsondubz 
Copper - Posts: 193
Copper spacespace
Joined: September 20, 2005
Posted: November 13, 2006 at 3:07 PM / IP Logged  
Connect it to the vehicles +12V ignition wire or the battery...
angelars 
Copper - Posts: 176
Copper spacespace
Joined: November 06, 2006
Location: United States
Posted: November 27, 2006 at 12:22 PM / IP Logged  
On the DEI remote starts there is an heavy orange wire that's marked as 'accessory output'. It powers the climate control system. We do a lot of Ford dealership installs and was wondering where it should correctly be hooked up. We were told to hook it up to the ignition switch along with a relay (as shown below) but that doesn't sound right. Shouldn't it go to the blower motor or something like that? Thanks.
DEI, Viper remote starts -- posted image.
mobilecustoms 
Silver - Posts: 397
Silver spacespace
Joined: November 04, 2005
Posted: November 27, 2006 at 12:26 PM / IP Logged  
thats if you need more than 1 acc wire hooked up
angelars 
Copper - Posts: 176
Copper spacespace
Joined: November 06, 2006
Location: United States
Posted: November 27, 2006 at 12:55 PM / IP Logged  
So where is the orange wire supposed to originally go?
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: November 27, 2006 at 1:29 PM / IP Logged  
it should go to whatever the acc wire in any particular vehicle is.....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
angelars 
Copper - Posts: 176
Copper spacespace
Joined: November 06, 2006
Location: United States
Posted: November 27, 2006 at 1:35 PM / IP Logged  
Yes of course but at the ignition OR at the output (blower motor feed)?
jasondavis05 
Copper - Posts: 55
Copper spacespace
Joined: November 14, 2006
Location: United States
Posted: November 28, 2006 at 2:36 AM / IP Logged  
at the ignition

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer