the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 Malibu R/S problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
start25 
Copper - Posts: 114
Copper spacespace
Joined: November 22, 2005
Location: United States
Posted: November 13, 2006 at 11:36 PM / IP Logged  

About 2 weeks ago I installed Crimestoper Remote Start, with PLJX bypass unit and everything worked fine untill today, remote doesnt lock or unlock or start the vihicle, only get blinking lights.  Has this happened to anybody before?  What could be the problem?

qdaddy 
Copper - Posts: 133
Copper spacespace
Joined: March 06, 2006
Posted: November 14, 2006 at 2:06 AM / IP Logged  
power and ground module separetly  check all conex then relearn2000 Malibu R/S problem -- posted image.
start25 
Copper - Posts: 114
Copper spacespace
Joined: November 22, 2005
Location: United States
Posted: November 14, 2006 at 10:10 AM / IP Logged  
What module?  The bypass module?
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: November 14, 2006 at 10:15 AM / IP Logged  
Do you get a security light flashing when you try to remote start it? It should try to start.. How was the starter installed?/ Soldered???
start25 
Copper - Posts: 114
Copper spacespace
Joined: November 22, 2005
Location: United States
Posted: November 14, 2006 at 10:20 AM / IP Logged  
No security light flashing, was not soldered...Do you have to solder all connections?
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: November 14, 2006 at 10:38 AM / IP Logged  
No you dont have to solder your connection, But I think it ensures a good solid connection. You need to check the connection from your brown wire on the remote and make sure it is not loose. Seems like the unit is getting the signal to start, but the voltage is not getting to the starter wire in the car....

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer