avital 4400 alarm remote start

What bypass did you use? Check your connection on the parking lights, you MUST have the wrong wire. If you used the correct bypass, the locks and door trigger should be done THRU it. The door pins are also found IN the doors, on both sides.

i am not familiar with the avital part numbers but i am familiar with the DEI product.

i would say that you may have the "armed while driving" programmed on or the "vrs" security. which is triggered when the door is opened.

on the other hand the system may not be seeing ignition and could be triggering the remote to page the owner because the shock sensor is seeing movement.

if this is a remote starter and alarm system what kind of "security bypass" module did he use? there is a specific module for that truck that will do the door trigger-domelight supervision-locks-security-passlock-and horn honk.

if this module was not used i suggest it. it works nicely and programmes very easy. it is called a 457g and directed electronics sells it. well worth the money.

i hope i could be of some asistance.