the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Disable Acura 1.6 EL Alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
scan 
Member - Posts: 2
Member spacespace
Joined: November 17, 2006
Posted: November 17, 2006 at 12:46 PM / IP Logged  
Hi all,
I have an Acura 1.6 EL 2000. The alarm will randomly triggering (mostly when the weather is damp) I've read that I can disable the alarm by grounding one of the wires on the hood. This will fool the system into thinking that the hood is still open and thus the alarm system will not arm. Could some please let me know what wire I need to ground and where to ground it.
I'm a newbie to all this stuff so please provide as much details as possible.
Thank You.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: November 18, 2006 at 4:54 AM / IP Logged  
Are you trying to disable the "factory" security? And, you have installed something aftermarket...? I'm confused my friend.
scan 
Member - Posts: 2
Member spacespace
Joined: November 17, 2006
Posted: November 18, 2006 at 7:46 AM / IP Logged  
Yes I'm trying to disable the "factory" security and No, I'm not installing something aftermarket.
Thank.
CruisinS&S 
Copper - Posts: 225
Copper spacespace
Joined: February 05, 2003
Location: United States
Posted: November 18, 2006 at 6:45 PM / IP Logged  
im not sure what the acura EL is what kind of car is this? The TL is blk/red to blue RL is grn red both are in driver door coming off key cylinder in door. (all acuras disarm wire is in driver door off key cylinder)) To check turn key to unlock in drivers door and the wire will read ground. Just screw into ground to perm. disable factory alarm
Cruisin Security And Sounds
mono788 
Member - Posts: 13
Member spacespace
Joined: December 01, 2002
Location: Canada
Posted: November 20, 2006 at 4:28 PM / IP Logged  
The 1.6EL always come w/ factory alarm. You need to ground the factory alarm disarm wire in order to bypass the whole system. "The FACTORY SECURITY Module is located UNDER the PASSENGER FRONT SEAT, this BLUE (-) Pin B8 wire will only TEST when TURNING the KEY in the DRIVERS SIDE DOOR KEY CYLINDER." Hope this help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer