Viper 5900, sensor, door locks

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5900, sensor, door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

heyitzalan

Member - Posts: 14

Joined: January 02, 2007

Location: United States

Posted: January 03, 2007 at 8:52 PM / IP Logged

Hi, i just ordered a viper 5900, and it only come with stinger double shock sensor. Anybody have clue how to add one or more sensor like tilt or glass sensor with the stinger double shock sensor?

HELP! Viper 5900, sensor, door locks -- posted image.

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 03, 2007 at 9:37 PM / IP Logged

its plug and play. there should be two more ports for sensors.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: January 03, 2007 at 9:38 PM / IP Logged

Or if you get a piece thats not dei you can add it on using the multiplex blue input wire on the brain or using the green wire on the shock sensor side of the harness for instant trigger. You have many options here.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

heyitzalan

Member - Posts: 14

Joined: January 02, 2007

Location: United States

Posted: January 03, 2007 at 9:42 PM / IP Logged

there is only one "shock sensor" port, nothing else.

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 03, 2007 at 9:46 PM / IP Logged

appologize for that. i was thinking of 5000 brain but you can wire it through the shock sensor like above mentioned.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

heyitzalan

Member - Posts: 14

Joined: January 02, 2007

Location: United States

Posted: January 03, 2007 at 9:51 PM / IP Logged

i only have power(red), ground(black), alarm negative output(blue), and warn negative output(green) wires in the shock sensor port, i want to add tilt and glass sensor along with the same wire, how can i do that?

Back to Top

heyitzalan

Member - Posts: 14

Joined: January 02, 2007

Location: United States

Posted: January 04, 2007 at 11:06 PM / IP Logged

anyone know?

Back to Top

heyitzalan

Member - Posts: 14

Joined: January 02, 2007

Location: United States

Posted: January 13, 2007 at 4:40 PM / IP Logged

I have solder my actulator to my viper + and - wire to the brain. i press arm and disarm it won't lock or unlock my actulator. All it does is beep, and beep beep.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 5900, sensor, door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.