98 park ave, remote start accessory wiring

Can someone tell me which wires need to be connected from Acc. on a Auto Command remote starter to the heater and A/C. On a 98 Buick Park Ave. The car starts and runs but no heater or A/C. Thank You very much, Dan Hughes

KEY T-HARNESS IMMOBILIZER GM KEY-2    N/A    GM's PK3 TRANSPONDER ANTI-THEFT System, Requires 791 Module and Extra Ignition Key PART   COLOR LOCATION DIAGRAM 12 VOLT CONSTANT   RED (+) and RED / WHITE (+)    IGNITION SWITCH HARNESS      STARTER YELLOW (+)   IGNITION SWITCH HARNESS      STARTER 2 N/A       IGNITION 1 PINK (+) IGNITION SWITCH HARNESS    IGNITION 2 WHITE (+) IGNITION SWITCH HARNESS      IGNITION 3 N/A        ACCESSORY /HEATER BLOWER 1 ORANGE (+)   IGNITION SWITCH HARNESS      ACCESSORY /HEATER BLOWER 2 N/A        KEYSENSE N/A        PARKING LIGHTS ( - ) GRAY/BLACK (-)   @ LAMP COLTROL Module, See NOTE *1      PARKING LIGHTS ( + ) BROWN (+)   @ LAMP CONTROL Module, See NOTE *1      POWER LOCK RED / BLACK (TYPE B)   @ DRIVERS DOOR LOCK SWITCH in drivers door      POWER UNLOCK ORANGE / BLACK (TYPE B)   @ DRIVERS DOOR LOCK SWITCH in drivers door      LOCK MOTOR WIRE GRAY (+)   IN DRIVERS DOOR      DOOR TRIGGER WHITE (-)   @ UNDER DASH LIGHT      DOMELIGHT SUPERVISION USE DOOR TRIGGER,, Requires #775 Relay        TRUNK RELEASE BLACK (-), Requires #775 Relay   @TRUNK RELEASE SWITCH      SLIDING POWER DOOR N/A        HORN BLACK (-)   @ STEERING COLUMN HARNESS      TACH PURPLE / WHITE   @ IGNITION CONTROL MODULE      WAIT TO START LIGHT N/A        BRAKE LIGHT BLUE (+) or WHITE (+)   @SWITCH ABOVE BRAKE PEDAL      FACTORY ALARM DISARM   LIGHT GREEN (-)   IN DRIVERS DOOR MODULE in DOOR      ANTI-THEFT GM's PASSKEY 3 (PK3 on Steel Shaft of Ignition Key) TRANSPONDER SYSTEM   TRANSPONDER @ IGNITION SWITCH TUMBLER      NOTES NOTE *1 The LAMP CONTROL Module is located to the RIGHT of the steering column and is bolted to the back side of the dash. LINK 1 LINK TEXT 1 LINK 2

ACCESSORY /HEATER BLOWER 1 ORANGE (+)   IGNITION SWITCH HARNESS