Crimestopper GM-SL2

Home / the12volt's Install Bay / Car Security and Convenience / Crimestopper GM-SL2 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

e140

Member - Posts: 2

Joined: December 31, 2006

Posted: January 08, 2007 at 7:56 PM / IP Logged

Doing remote start on a 2007 Trailblazer and was wondering if the yellow key wire needs to be split into the bypass. I know the Data OBD2 needs to be hooked up. On my instructions it states Cadillac Only for the yellow? But I think I need to split the yellow and also add the Data BCM to the ORANGE / black? Just want to make sure. Thanks.

Back to Top

e140

Member - Posts: 2

Joined: December 31, 2006

Posted: January 08, 2007 at 9:35 PM / IP Logged

Did somemore searching and it seems like they all need to be hooked up. Even the DEI splits the yellow and adds the BCM. Hope my Remote start had a neg out while running......

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Crimestopper GM-SL2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.