the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1990 cavalier z24 compustar 900fmas


Post ReplyPost New Topic
< Prev Topic Next Topic >
xbot 
Member - Posts: 5
Member spacespace
Joined: January 01, 2007
Location: Canada
Posted: January 28, 2007 at 12:52 PM / IP Logged  
Finally started installing the compustar 900fmas in my car and have run into a few wires where it doesnt say where to hook up or make sence.
First question is; "CN #4 - Pin 4:(Blue) This wire is the (+) lock output that doubles as a (-) unlock output. Pin 5: (Blue/Black) This wire is the (-)lock output that doubles as a unlock output." --- How would i go about wiring this up, and could you possibly explain what it means?
Second Question is; "CN #5 - Pin 1:(Orange) This is the rearm wire. It provides you with a (-) Pulse when armed, after remote start and then again one second after remote start shuts down. Pin 2:(ORANGE / White) This is the disarm wire. It provides you with a (-) pulse when disarmed and before remote start." --- This also doesnt say where to hook this up to.. any help on this?
Third Question is on CN#2 Pin #2; This is the (-) status out wire. It says that this wire would be connected to a transponder module or maybe a VATS module. However, i dont believe my car has either of those.. but that wire seems important?
Fourth Question.. I really dont want to mount the RPS on the bottom left of the window or anywhere on the window for that fact. Is there any other spot where it would be hidden and still function correctly? I was thinking maybe under my speaker grille and just drill out a little hole for the eye.
If i could get answers to my questions, it would be greatly appreciated!
prdjr165 
Copper - Posts: 293
Copper spacespace
Joined: October 31, 2002
Location: Illinois, United States
Posted: January 28, 2007 at 3:42 PM / IP Logged  
Door lock wires:
blue(+)goes to lt blue (+)in drivers kick panel-LOCK
bl/blk (+) goes to black(+) in drivers kick panel-UNLOCK
LOOK FOR THE DIAGRAM IN THE LEFT COLUMN UNDER SECURITY-DOOR LOCKS,you might need diodes for this setup.
ORANGE / WHITE disarm wire is only needed if you have a factory alarm,I don't think you do.
Orange wire sounds like a factory alarm wire-only needed to arm a factory alarm
status out is used for any bypass module you use,you shouldn't need that one either.
xbot 
Member - Posts: 5
Member spacespace
Joined: January 01, 2007
Location: Canada
Posted: January 28, 2007 at 4:45 PM / IP Logged  
AWESOME man, thanks alot.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer