02 highlander

Home / the12volt's Install Bay / Car Security and Convenience / 02 highlander (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

xghost

Member - Posts: 34

Joined: February 04, 2007

Location: Canada

Posted: April 04, 2007 at 9:38 PM / IP Logged

Whomever has done a rs on this vehicle, I am wondering what bypass was used. I have a customer that did his own rs and he cannot program the bypass. Tried many assorted bypasses. My rs parter tried to program it and it wouldnt program. The only bypass we havnt tried was the universal "Key Req" . Has anyone had problems like this?

Thanks

Back to Top

spookiestylez

Silver - Posts: 531

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2005

Location: Virginia, United States

Posted: April 04, 2007 at 9:55 PM / IP Logged

what kind of bypass kits has he used?

I would have used the XK01 or the PKT from bypasskit.com

or the directed 1100F with the software change.

none of these would have to keep the key.

rtfm

Back to Top

xghost

Member - Posts: 34

Joined: February 04, 2007

Location: Canada

Posted: April 04, 2007 at 10:00 PM / IP Logged

Yup. Also tried ifar bypass and prostart bypass tty100 and idatalink. Forget what idatalink but tried. Still havnt tried Toyda bypass from ifar.

Back to Top

xghost

Member - Posts: 34

Joined: February 04, 2007

Location: Canada

Posted: April 04, 2007 at 10:31 PM / IP Logged

But it doesnt matter the toyda and prostart bypass are the same. I dunno.

Back to Top

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: April 11, 2007 at 9:35 AM / IP Logged

I did a succesfull remote start on the 2002 Highlander. I used a 555x. In the actual immobilizer harness under they cylinder you will find the wires that you need. I alson noticed that the key sense was positive so you have to use relay for it to program. It worked with no problem. Also check his locks and unlocks. That vehicle is not simple in regards to this. You need a to connect to wires on the passenger kick panel and use diodes to make them work using . Otherwise the locks will only work during remote start. If you dont hook it up that way then your customer will ask why the locks stop working after 2 minutes of being armed(factory arms which will not allow the doors to unlock or lock). YOU MUST USE DOC 1070 provided by DEI.

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: April 12, 2007 at 10:36 AM / IP Logged

use a universal bypass and a TOYDL and you'll have this vehicle done in about an hour!!

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

02 highlander

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.