2006 ford f 150 door trigger

Home / the12volt's Install Bay / Car Security and Convenience / 2006 ford f 150 door trigger (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wire4veins

Copper - Posts: 97

Joined: November 25, 2002

Location: United States

Posted: April 18, 2007 at 6:57 PM / IP Logged

I am trying to access the door trippers on a 06 F-150 and as per Directwire, with keyless they are on the rear cab wall at the BCM. I cannot seem to figure out how to remove the rear seat back support to access the BCM. Anyone that can help or knows anywhere else to grab them it would be greatly appreciated.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 18, 2007 at 7:21 PM / IP Logged

You can find them in the running board area of the drivers door. same colors as DEI list's.

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: April 18, 2007 at 8:02 PM / IP Logged

Unless you are dead set on using the seperate triggers I would use the BLACK/ blue (+) domelight wire.

Mike

Back to Top

wire4veins

Copper - Posts: 97

Joined: November 25, 2002

Location: United States

Posted: April 18, 2007 at 8:14 PM / IP Logged

Thanks Mike I found that wire, but wasn't sure of the door coverage, etc and beleive me I am not set on the seperate triggers. I am so thankful for this site where installers can help each other out. Thanks Again.

Back to Top

tragik

Copper - Posts: 169

Joined: September 28, 2005

Location: Alaska, United States

Posted: April 19, 2007 at 6:14 PM / IP Logged

Is this just an alarm? Or are you starting it too?

The BLACK/ blue wire is great for detecting door triggers w/ just an alarm, but when the domelight kicks before and after a remote start cycle, it can set off the alarm unless some arrangements are made. I usually diode isolate seperate triggers to trip the alarm ,and then break the drivers door trigger with a diode and tag the bcm side of the wire with a rearm pulse to shut off the radio. To get all 4 triggers in one place you have to go under the rear scuff panel on the drivers side. I don't think you can get the back doors in the kick.

Northstart.....or start it your damn self.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 ford f 150 door trigger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.