toyota hiace 1997 alarm wiring

hi anyone have any wire locations or anything that can help me

im fitting a basic alarm with ultra sonics central locking hazard flash etc

just need to know where or which wires to connect to on the van as i dont want to hack all the wires locating them

many thanks for anyone who can help

This applies to vehicles with multi-point locks, you may need a motor in driver's door.

Indicators GREEN / WHITE NEG  at Haz switch, lock/unlock, GREEN/ red, GREEN/ black at lock module to left of brake pendant, front/rear side doors, WHITE/ red and red yellow,- and diode together if your alarm hasn't separate zone inputs, A piilar loom, 12v+, ign and starter in ign loom, unused grommett above main wiring gromett at drive side of engine bay, you will need a bracket for hood switch and mount this and siren to rear engine bulkhead. 

many thanks