need dei valet 712t wire harness details

Home / the12volt's Install Bay / Car Security and Convenience / need dei valet 712t wire harness details (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mapboyone

Member - Posts: 1

Joined: July 16, 2007

Location: United States

Posted: July 16, 2007 at 6:41 PM / IP Logged

I'm trying to install a DEI 712T keyless entry system in my 1997 VW Jetta. It came with no installation instructions so I don't know the wire color for the single 18-Pin wiring harness. Does anyone have the install instructions, or at least the pin-outs (colors) for the 18-pin harness? I can't find any other DEI model (Valet, Hornet, Viper, etc.) numbers that have a single 18-pin harness. It also has the two separate little 2-pin connectors for the valet/program switch and the LED. I can figure out the vehicle wiring, relays, etc. for this vacuum lock system if I know the 712T harness set-up. Many thanks !

my kids say "daddy can fix anything"....got them fooled !

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: July 16, 2007 at 7:44 PM / IP Logged

Have you tried the search button at the top right of the page here?

Back to Top

coollerpad

Member - Posts: 4

Joined: July 17, 2007

Location: United States

Posted: July 17, 2007 at 2:37 AM / IP Logged

Here's the info on the wires on it:

Valet 712T Primary Harness (H1)

1- Red (+)12v constant power input

2- Blue (-2)200mA second unlock output

3- blk/wh1 Input domelight supervision relay #87

4- blk/wh Output domelight supervision relay #30

5- GREEN/ blk Lock #30 Common output

6- wh/blk Lock #87 Normally closed

7- Violet/blk Lock #87 Normally open (input)

8- Blue/blk Unlock #30 Common (output)

9- Violet Unlock #87 Normally open (input)

10- White (+/-) Parking light flash output

11- Black (-)Chassis ground input

12- Brown (-)Horn honk output

13- Lt Grn/blk Factory Alarm disarm

14- WHITE/ Blue (-)200mA Ch3 validity output

15- Yellow (+)Switched ignition input(accessory

16- Orange (-)500mA Ground-when-armed Output

17- BROWN / Blk Unlock #87A Normally Closed

18- RED / White (-)Output of Channel 2

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need dei valet 712t wire harness details

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.