2004 mustang clutch

Home / the12volt's Install Bay / Car Security and Convenience / 2004 mustang clutch (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jredecop

Member - Posts: 42

Joined: September 24, 2006

Location: United States

Posted: September 26, 2007 at 10:56 PM / IP Logged

I am fixing to put a remote start on a 2004 manual trans mustang. I have been reading about the clutches and was wondering if anyone could tell me the wires/colors and clutch type this car has. Thanks for your help.

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: September 27, 2007 at 12:26 AM / IP Logged

if u promise to use manual starter only, then ill forward the diagram

jredecop

Member - Posts: 42

Joined: September 24, 2006

Location: United States

Posted: September 27, 2007 at 7:06 AM / IP Logged

yup sure am. and they guy i am installing it for is fully aware that its not the best idea ever and that i am not too crazy about it. thanks for your help.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 27, 2007 at 8:17 AM / IP Logged

jredecop wrote:

yup sure am. and they guy i am installing it for is fully aware that its not the best idea ever and that i am not too crazy about it. thanks for your help.

Your answer makes it sound like your NOT putting in a manual safe remote start! It's the sound of "doubt" you have.... if done properly... they are fool proof.

What brand and model are you installing?

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: September 27, 2007 at 9:38 PM / IP Logged

Ok, run your starter wire from your rs directly to the wht/pnk at the clutch pedal switch as following diagram this is for 04 mustang

2004 mustang clutch -- posted image.

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 27, 2007 at 9:49 PM / IP Logged

Why the diagram? the first line of text.... is all you need to do. The diagram confuses ME! 2004 mustang clutch -- posted image.

Just connect the R/S starter wire, to the WHITE/ pink on the clutch switch.

jredecop

Member - Posts: 42

Joined: September 24, 2006

Location: United States

Posted: September 27, 2007 at 10:10 PM / IP Logged

thanks guys. the kit i am putting in is the bulldog deluxe 500. It says auto/manual transmission installations. I have installed about 15 of these, but all on autos. Wow, this sure sounds simple enough!! Kinda what I thought it would be. Anyone know where the wire is for the handbrake? Color?

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 27, 2007 at 10:21 PM / IP Logged

LIGHT BLUE/BLACK or VIOLET / YELLOW (12 pin plug, pin 4 ) at the GEM located above the driver kick panel.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

jredecop

Member - Posts: 42

Joined: September 24, 2006

Location: United States

Posted: September 27, 2007 at 10:29 PM / IP Logged

you guys rock, thanks again!!

jredecop

Member - Posts: 42

Joined: September 24, 2006

Location: United States

Posted: September 27, 2007 at 10:30 PM / IP Logged

is that a negative trigger?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.