the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

use factory remote for starter?


Post ReplyPost New Topic
< Prev Topic Next Topic >
flashbang 
Member - Posts: 29
Member spacespace
Joined: October 10, 2002
Location: New York, United States
Posted: September 28, 2007 at 11:02 AM / IP Logged  
Hi,
How can I use my factory remote fob to start my 2002 Jeep Grand Cherokee withe the pro-start 2300?
dswift 
Copper - Posts: 396
Copper spacespace
Joined: March 12, 2007
Location: United States
Posted: September 28, 2007 at 12:50 PM / IP Logged  
GET compustar and i'll tell you how to do it. LOL
"dont ground out!"
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: September 28, 2007 at 3:19 PM / IP Logged  
Does the pro-start have any type of activation input?
The products I use typically have an activation input that you tie into the lock (or unlock) leg of a door lock actuator then program the unit for 1,2, or 3 pulses to activate. Keep in mind that some factory transmitters do not work once the vehicle is started which means if you do it this way and your transmitters do not work when running you will have to unlock the door with a key when remote started.
Installer, IT support, and FFL. I need less hobbies.
flashbang 
Member - Posts: 29
Member spacespace
Joined: October 10, 2002
Location: New York, United States
Posted: September 28, 2007 at 8:17 PM / IP Logged  
Yes,the green wire (-) input is the trigger. When I touch this wire to ground it activates the remote starter and the jeep starts.
The factory remote transmitter works the doors also when the car is started remotely.
I have a AMENITY Pro-start 2300 with the JDL-PK in my '02 Jeep grand cherokee.
I was told a few years back it was some combo I would have to do with the lock/unlock buttons to make it start.
What I really would like is to use the panic button on the OEM fob to start the Jeep.
2300 Pro-Start Manual

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer