toyota keysense problem

2005 Sequoia everything works fine, but the factory alarm goes off during autostart 80% of the time and it shuts off using the 160XV remote...

Anything I might be missing??? o I hook up the yellow/ green to what on the Remote Start or the 556U.. I hooked to blue (ground out when runnning, that is also being used for the 556U)When I remote Start it just cranks and does not Start.

If you are using a ground while running on a bypass, as well as the keysence... you will need to isolate with diodes.

And yes you need both, the keysence and the bypass.

I just need to hook up the blue from remote start to the bypass and the yellow?green diode isolate each of them, i do not need to hook up keysense fom the bypass to keysense right??

use the blue status to turn on the 556U and use the blue/white second status to trigger keysense....

you do not need to hook up the keysense wire of the 556U on a Toyota....