compustar 2wsh, 98 sunfire

Home / the12volt's Install Bay / Car Security and Convenience / compustar 2wsh, 98 sunfire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

urr_done

Member - Posts: 1

Joined: November 03, 2007

Posted: November 03, 2007 at 11:17 PM / IP Logged

ok i just installed a 2wsh as on a 98 sunfire and when i go to start it starts but then shuts down imediatly. why why why???

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: November 04, 2007 at 8:51 AM / IP Logged

your car has a passlock 1 system. When u remote start your car and ur car turns off, check your "ANTI-THEFT" light to the left of th ecluster. if it flashes or is solid, you have not bypassed the passlock properly.

Back to Top

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: November 04, 2007 at 8:54 AM / IP Logged

forgot to mention, if you keep remote starting for 3 times, and all are unsucessful, try sticking your key into the cyclinder and TRY starting the car. To determine for sure u bypassed it wrong, this is what should happen. put key into ignition, all lights will go on; when u crank, nothing will happen. that means u did ur passlock wrong. wait 10 min with the key on ignition, light will stop flashing then proceed.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 04, 2007 at 9:09 AM / IP Logged

If you already bypassed the the Passlock system and it still does this then you have either not found the proper tach wire or it did not program properly. Make sure that the system has a solid tach wire programmed to it otherwise it will start and shut down.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar 2wsh, 98 sunfire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.