94 cherockee door lock

Home / the12volt's Install Bay / Car Security and Convenience / 94 cherockee door lock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rfwave

Copper - Posts: 120

Joined: November 06, 2006

Location: Alberta, Canada

Posted: December 13, 2007 at 12:40 AM / IP Logged

iam doing a RS & keeyless lock& unlock for this truck . the only one thing is i dont know how to hook up the two wires for power lock/unlock . i knew this is a type A and found the wires , i tested them , they are worked , but my jumper wire with 30 amp burnt out .??? , what the...? scared me ! i need your help .

Back to Top

realsnake

Member - Posts: 18

Joined: December 07, 2007

Location: British Columbia, Canada

Posted: December 13, 2007 at 12:43 AM / IP Logged

They are reverse polarity!!! search on the forum for schematic

Back to Top

realsnake

Member - Posts: 18

Joined: December 07, 2007

Location: British Columbia, Canada

Posted: December 13, 2007 at 12:44 AM / IP Logged

https://www.the12volt.com/doorlocks/page3.asp#4w

Back to Top

rfwave

Copper - Posts: 120

Joined: November 06, 2006

Location: Alberta, Canada

Posted: December 13, 2007 at 8:04 PM / IP Logged

Still don't get it ( not easy to teach me because I am too slow ) can you give me more details?

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: December 13, 2007 at 8:44 PM / IP Logged

What is the make and model of the RS you are installing?

The 94 Cherokee uses Positive triggers to activate the factory relays that control the door locks. If you are burning out fuses you are on the wrong wires in the vehicle. In the driver's kick panel you should find a pink/violet for unlock and a ORANGE / violet for lock.

Installer, IT support, and FFL. I need less hobbies.

Back to Top

rfwave

Copper - Posts: 120

Joined: November 06, 2006

Location: Alberta, Canada

Posted: December 14, 2007 at 12:41 PM / IP Logged

Autostart AS-1755 . yes i have found these wires (as you stated above) , and i got it right (the two negative output wires from the RS) .

Back to Top

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: December 14, 2007 at 1:04 PM / IP Logged

As Twelvoltz mentioned, 94 Cherokee uses Positive triggers, Autostart as1755 provides neg outputs for lock on brown wire & unlock on green wire on the 12 pin wire harness. U need to use 2 relays to convert them to positive outputs for the cherokee. See following diagram

94 cherockee door lock -- posted image.

Back to Top

rfwave

Copper - Posts: 120

Joined: November 06, 2006

Location: Alberta, Canada

Posted: December 14, 2007 at 3:52 PM / IP Logged

Thank YOU !

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94 cherockee door lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.