1996 pontiac sunfire theft light issue

Let me preface by saying... never again. that said. I was working on my sisters car yesterday installing a remote starter, the Unit is an Ultra Start, unsure of model # off hand. The bypass I intended to use was a Platform 6 (XK06) from bypasskit with the PLXR firmware. Well, heres the problem, I disconnected the battery and made all my appropriate connections, including the bulb check wire. The Passlock wire I grabbed was the yellowish/white colored wire in the 3 wire ribbon harness coming off of the key cylinder. Now when I went to reconnect the battery and learn the bypass all hell breaks loose. The fuel pump turns on, but the car just cranks and cranks and cranks, doesnt get spark. With the key in the "ON" position, the "Theft System" light glows solid on the cluster, it is not flashing, but on solid. I have tried doing the learn routine and it has not worked. Whats more, the GM dealers in the area have refused to look at it. My questions: 1. Anyone know of what may be going on and how to fix it, or what the exact learn routine is? 2. If that fails anyone know how to remove the passlock system? I know thats a stretch.

You did it wrong, recheck your connections or get another set of eyes in there. Passlock 1 is the worst abberation in existence

Lol, allow me to clarify, I was trying to start it with the key and it was not starting... So my connections shouldnt have anything to do with it, the RS and Bypass are both unplugged at this point.

thepasslock wire (yellow) needs to be cut for the installation of your bypass module. so, make sure u didnt ssnip any wires on the passlock or ignition barrel. triple check ur connections.

On this bypass it shows for passlock 1 wiring to splice into the yellow wire, not to cut it, so it is still intact. my problem is not that the remote starter will not work, it is that the car will not start with the key. No wires have been cut.

it will crank but not start, security light is on solid when key is in the run position. I tried the whole key in the ignition thing and the light didnt go away. When I turn it to on, is it the first click (ACC) or second click (IGN)

what do u mean all wiring as it pertains to the PK1 system