3 Position Rotary Cam Switches?

Home / the12volt's Install Bay / Miscellaneous - Off Topic / 3 Position Rotary Cam Switches?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

itolond

Copper - Posts: 87

Joined: February 13, 2016

Location: Singapore

Posted: July 26, 2020 at 10:45 PM / IP Logged

Hi Forum,

I am seeking a good (newbie) guide to 3 position rotary cam switches with a vision to specify to a supplier what I need. In short I am looking for a rotary cam switch to manage an number of installed electrical devices on the back of the 4x4 (all well below 15A. 11-14.5VDC) and by far the rotary cam switch is best for ease of use.

While they look straight forward I am not sure if you can have an input (say 12VDC) which switches between 2 outputs on a single cam. any pointers would be appreciated...

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.