the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Cam gears


Post ReplyPost New Topic
< Prev Topic Next Topic >
carstereonewb 
Member - Posts: 35
Member spacespace
Joined: April 13, 2006
Location: United States
Posted: April 27, 2006 at 5:25 AM / IP Logged  

I just bought a 1998 mitsubishi eclipse and have already gotten into enough trouble for a lead foot so i am not looking for speed but the car itsself has a good look to it so thats why i got it.  the guy i bought it from has a set of really good cam gears that he paid over 300$s for new still in the box.  he said i should put them on when i change the timing belt but i wasn't sure how often stock cam gears go bad because i am not looking for the performance upgrade i would rather sell them but was wondering the pro's and con's to switching out cam gears.

If the cars not shaking the radio's to quiet
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 27, 2006 at 10:23 AM / IP Logged  

Adjustable cam gears will only add horsepower to your vehicle and OEM cam gears don't normally wear out ( unless it's a timing chain ). The canvas/rubber belts that are OEM will not wear out the cam gears so chances are you won't need to replace the gears unless you want to retard or advance your timming for added horsepower or other tweaks done to the vehicle.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
5150azn 
Silver - Posts: 584
Silver spacespace
Joined: June 21, 2004
Location: United States
Posted: April 27, 2006 at 10:31 AM / IP Logged  
Pros: Being able to tune your valve timing. This requires a few major tools to do properly. Like one would be a dyno.
Cons: Possability of hurting your valves and losing horse power due to blind tuning.
Tell the Snap-On guy I'm not here!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer